Hydraulic Braces & Temporary Works

Walton-on-Thames, Surrey

Contractor: Gold Max

A new industrial park pumping station required drainage infrastructure. As part of the project, we installed two large manhole rings using GU13 interlocking Sheet Piles, working in difficult ground conditions with a high-water table.

The Conquip 300 Brace being used at Walton-on-Thames, with Gold Max.

Littlehampton, Hampshire

Contractor: Newtownstewart Ltd

We installed a large crate system on the main A259 bypass in Littlehampton, with live traffic in close proximity. Complex works, traffic streams and night deliveries were navigated to accommodate the client’s needs.

Greater London

Contractor: Red Parrot

We provided a responsive excavation design service, ahead of the installation of a new concrete holding tank at a major London water treatment works site.

Hills, Oxfordshire

Contractor: Gold Max

We provided a brace system to enable the installation of a large pump station at 8.5m deep on the project in North Oxford.

Northfleet, Kent

Contractor: Gallagher Group Ltd

We created the temporary works design at this electronic waste facility construction site. The highly complex designs, which required CAT 3 checks, were required in order to excavate the ground for three new underground drainage tanks, in very challenging ground conditions (a mix of gravel, sand and clay). The in-house team also supervised the installation of three levels of 300 Brace to each earthwork support system.