To protect all types of trench sheets and light piles from excessive damage during installation when placed over the top of a trench sheet.

Similar to a bottom discharge skip but with the addition of an optional side chute.

· To fit Excavators from 9t to 50t.
· Delivered and installed by our fully trained fitting team.

For use with single and double acting cylinders. The hand pump gives you a delivery pressure of up to 4000psi.

One stopper covers a range of pipe diameters. For example, a 300mm and a 375mm pipe could be tested using the same pair of stoppers (300/400), which means less time and money spent on re-sourcing additional stoppers.

· Available in timber.
· Standard sizes available 3m, 4m, 5m, 6m, 7m and 8m.
· Certified to BSEN131 Standards.
· Tested to performance requirements of BS2037 Class 1 Industrial Standards.

Designed for pitching all types of trench sheet and light pile by use of a spring loaded pin mechanism which inserts through the lifting hole in the sheet.

Ideal for use in the construction of ground-slabs, roadways, foundations and drives.

Designed to remove trench sheets from an excavation safely, one at a time.

Site or road going bowsers to transport fuel or water from site to site.