Lightweight Trench Box

A lightweight trench lining system for trench ground support.

The Conquip Lightweight Trench Box is a simple to assemble, two sided trench lining support system designed to be installed by an excavator using the ‘dig and push’ technique, or by simply carrying out the excavation and then lowering each box into place.

The Trench Box is normally selected for installing utility pipes where ground movement is not critical. The size of the system required depends on maximum trench depth requirements and the size of pipe sections.  It is generally suitable for trench depths of up to 3 metres.

If you have a large excavator, or you are digging a sizeable trench, our standard Trench Box will be more suitable.

Quantity

Details

  • Suitable for trench depths of up to 3 metres and trench widths of up to 4 metres (using Conquip Variable Struts).
  • Lightweight design for smaller excavations and when site equipment has less lifting capacity.
  • Designed for use with both Conquip Incremental Struts and Conquip Variable Struts.
  • Manufactured in the UK from high quality British and European steel.
  • Can be supplied with a full range of suitable lifting and extraction chains, edge protection and trench access accessories.

Specification

ITEM PRODUCT CODE HEIGHT EXTERNAL LENGTH INTERNAL LENGTH WORKING WIDTH
(Min - Max)
MAXIMUM WEIGHT* LIMIT STATE DESIGN LOAD
Base Box TL102-00003 2000mm 3000mm 2600mm 1070-2470mm 1418kg 40kN/m²
Extension Box TL102-00004 1000mm 3000mm 2600mm  1070-2470mm 844kg 40kN/m²

*Weight will be equal to or less than the weight stated depending on your strut configuration. Our team will provide more information on trench widths or working widths depending on requirements specified in your quote request.

We're working on this so check back soon.

Want to shout about this product? Give us a review on TrustPilot.