- Equipment
- Products
- All Equipment
- Concrete Skips
- Concrete Washout
- Excavator Attachments
- Forklift Attachments
- Lifting Equipment
- Site Equipment & Storage
- Trench Shoring
Trench Box
A trench lining system for trench ground support.
The Conquip Trench Box is a simple to assemble, two sided trench lining support system designed to be installed by an excavator using the ‘dig and push’ technique, or by simply carrying out the excavation and then lowering each box inside.
The Trench Box is normally selected for installing utility pipes where ground movement is not critical. The size of the system required depends on maximum trench depth requirements and the size of pipe sections.
Not sure your machine has the capacity for these trench boxes? Our Lightweight Trench Box may be better suited to your requirements.
Specification
*Weight will be equal to or less than the weight stated depending on your strut configuration. Our team will provide more information on trench widths or working widths depending on requirements specified in your quote request.ITEM PRODUCT CODE HEIGHT EXTERNAL LENGTH INTERNAL LENGTH WORKING WIDTH (Min - Max) MAXIMUM WEIGHT* LIMIT STATE DESIGN LOAD Base Box TL101-00003 2560mm 3500mm 3100mm 1070-2470mm 2498kg 54.86kN/m² Extension Box TL101-00004 1310mm 3500mm 3100mm 1070-2470mm 1388kg 54.86kN/m²
- Trench Shoring
- Site Equipment & Storage
- Lifting Equipment
- Forklift Attachments
- Excavator Attachments
- Concrete Washout
- Concrete Skips
- All Equipment
- Products
