Close popup

We have detected that you are visiting from United States.

Please click here if you would prefer to visit our United States website.

X

My Quote

No products in the Quote.

Lifting with Telehandlers, Forklifts and Excavators: No matter the type of lift, basic principles apply

7th, October 2026

When the term “lifting operation” is used, people often think of cranes and involving heavy, bulky and complex lifts. But lifting operations happen every day in smaller or more routine situations too: A telehandler lifting a road plate. An excavator moving materials. A forklift positioning a roof truss.

Our Technical Support & Product Development Manager, Andy Greener, outlines his expert views here…

The regulations

Under LOLER, a lifting operation is an operation concerned with the lifting or lowering of a load. The regulation states that every lifting operation involving lifting equipment must be properly planned by a competent person, appropriately supervised and carried out safely.

HSE – Safe use of lifting equipment (LOLER) L113

The level of planning should be appropriate to the operation, its complexity, risk profile and the procedures in place for the project. HSE guidance recognises that lifting operations classed as basic or intermediate will require a different level of planning from complex operations.

That does not necessarily mean every movement requires its own new written lift plan but the important point is: A basic or routine lift is still a lifting operation.

Why attachments need consideration

Attachments can significantly expand what an excavator, forklift or telehandler can do.

They can also change the machine’s configuration and the way a load is lifted, carried or controlled.

Fitting a Fork Mounted Hook or Excavator Forks, for example, introduces different considerations from operating the machine in its conventional configuration.

The attachment therefore needs to be considered as part of the wider lifting arrangement, including the machine, attachment, load and task.

Depending on the operation, relevant considerations may include rated capacity, proximity to structures, ground conditions, load stability and Working Load Limit, machine deration, attachment compatibility and manufacturer usage instructions.

Exactly what is required will depend on the task, project procedures and the competent people responsible for the lifting operation.

For teams looking for more detailed advice or information, the Good Practice Guide and Standards for Plant Attachments provides additional guidance for Health and Safety leaders, Lead Appointed Persons, procurement teams and operatives around the selection, specification and use of excavator, forklift, telehandler and crane attachments.

Read here: Good Practice Guide and Standards for Plant Attachments

Planning is only one part of safe lifting

Planning the operation is important, but so is understanding the ongoing condition of the equipment being used.

Lifting equipment and attachments can move between projects, work in demanding environments and be used repeatedly throughout their service life.

That is why pre-use checks, LOLER examinations and maintenance all have a role — and they are all equally important.

Pre-use checks

A pre-use check provides an opportunity to identify visible damage, wear or other issues before equipment is used, every time.

The checks themselves will vary by product, so the competent person carrying out the checks should refer to the manufacturer’s technical user guide and the relevant project procedures.

For Conquip equipment, our technical user guides provide product-specific pre-use information and checklists. And, all relevant excavator and forklift attachment user guides contain additional information about intended use for lifting and carrying.

Find all our user guides here.

Related read: We have also covered the subject of pre-use checks in more detail with Andy in our Expert Q&A – Why pre-use checks matter and how to do them right

Thorough Report of Examinations under LOLER

A thorough examination is different from a routine pre-use check.

HSE describes it as a systematic and detailed examination of lifting equipment by a competent person to identify defects that are, or could become, dangerous.

Where LOLER applies, the standard examination periods are generally:

  • Lifting accessories — at least every 6 months
  • Equipment used to lift people — at least every 6 months
  • Other lifting equipment — at least every 12 months

Alternatively, examination intervals may be set through a written examination scheme drawn up by a competent person. Certain conditions, equipment or project requirements may also result in more frequent examination.

For a more detailed explanation of the requirements:

HSE – Thorough examination of lifting equipment (INDG422)

Maintenance and support throughout the equipment’s working life

Through Conquip Covered, our range of after-sales services, our engineers can support customers with LOLER thorough examinations and equipment inspections, alongside repairs, refurbishment, maintenance and genuine replacement parts.

Inspection findings are recorded digitally, with the relevant Report of Thorough Examination provided to help teams understand equipment condition, identified defects and recommended next steps.

The service is intended to support the ongoing management of Conquip equipment, while the requirements for an individual item and lifting operation remain for the relevant competent people and project teams to determine.

Plus, we can now offer customers a digital portal which gives buyers, site teams and QHSE professionals the chance to search for their equipment and their Report of Thorough Examinations (ROTEs), along with photos showing the work and any repairs made to their kit, see which items have passed or failed the last inspection and check when inspections are due in the future.

Explore Conquip Covered inspections, maintenance and after-sales support

Useful guidance to keep to hand

There is no single document that replaces competent planning, project procedures and product-specific information.

For teams working with lifting equipment and plant attachments, useful reference points include:

Construction Industry Plant Safety Group Plant Safety Group – Good Practice Guide, Safe Use of Telehandlers
View

HSE – Safe use of lifting equipment (LOLER) L113
The Approved Code of Practice and detailed guidance covering LOLER, including lifting operations, competence and thorough examination.
View L113

HSE – Lifting equipment at work: A brief guide
A shorter overview of the main requirements surrounding lifting equipment and operations.
View INDG290

HSE – Thorough examination of lifting equipment
More detailed guidance on thorough examinations, inspection periods, competent persons and examination schemes.
View INDG422

Good Practice Guide and Standards for Plant Attachments
Additional industry guidance around selecting, checking and using excavator, forklift, telehandler and crane attachments.
Explore the Guide

Manufacturer technical information
Product-specific information covering intended use, Working Load Limits, attachment methods, pre-use checks and operating limitations.
Conquip’s technical library here

Individual project lifting procedures
For the roles, processes and requirements applicable to the particular project and lifting operation.